Choose or
by pressing the COMPONENT or the
COMPUTER 1 button on the remote control unit.
Before using these buttons, correct input source should be selected through Menu operation as described below.
1
2
Use the Point ▲▼ buttons to select COMPUTER 1
and then press the Point ► button.
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal with
a COMPONENT-VGA Cable, select
.
When the input source is coming
from video equipment connected
to the COMPUTER IN 1/S-VIDEO
IN/COMPONENT IN terminal with a
Scart-VGA Cable, select .
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select
and then press the Point ► or the OK button.
When the Auto input function is set to On 1
or On 2, the input signal will be searched
automatically (p.52).
3
Use the Point ▲▼ buttons to select
or and then press the OK button.
Direct Operation
Menu Operation
Press the Point ▲▼ buttons
to select or
.
To Next Page
Loading...
Need help?
General
