41
Choose VIDEO or by pressing the VIDEO
or the S-VIDEO button on the remote control unit.
Before using these buttons, correct input source
should be selected through menu operation as
described below.
1
2
VIDEO
Direct Operation
When video input signal is connected to
the VIDEO jack, select VIDEO.
VIDEO
When the input source is coming
from video equipment connected to
the COMPUTER IN 1/S-VIDEO IN/
COMPONENT IN terminal with a S-
VIDEO-VGA cable, select .
When the Auto input function is set to On 1
or On 2 in the Auto setup function, the input
signal will be searched automatically (p.52).
Press the MENU button to display the On-
Screen Menu. Use the Point ▲▼ buttons to
select and then press the Point ► or the
OK button.
Use the Point ▲▼ buttons to select VIDEO and
then press the OK button.
VIDEO
Use the Point ▲▼ buttons to select COMPUTER 1.
And then press the Point ► button to access the
submenu items. Use the Point ▲▼ buttons to select
the and then press the OK button.
COMPUTER
1
Menu Operation
Press the Point ▲▼ buttons to
select .
To Next Page
Loading...
Need help?
General
