Notice for Unplugging the Power Cord
To unplug the power cord, follow the procedure below.
Important
• When you unplug the power cord, press the ON/RESUME button, then confirm that the POWER lamp is
off. Unplugging the power cord while the POWER lamp is lit or flashing may cause drying or clogging of
the print head and print quality may be reduced.
1.
Press the ON/RESUME button to turn the printer off.
Note
•
When the paper jam error or paper out error has occurred, you cannot turn the printer off even if
you press the ON/RESUME button on the printer. Dismiss the error, then turn off the printer.
If an Error Occurs
2.
Confirm that the POWER lamp is off.
3. Unplug the power cord.
The specification of the power cord differs depending on the country or region of use.
35
To Next Page
Loading...
Need help?
General