Cleaning the Paper Feed Rollers from Your Computer
Cleans the paper feed rollers. Perform feed roller cleaning when there are paper particles sticking to the
paper feed rollers and paper is not fed properly.
The procedure for performing the feed roller cleaning is as follows:
Roller Cleaning
1.
Prepare the printer
Remove all sheets of paper from the rear tray.
2.
Open the printer driver setup window
3.
Click Roller Cleaning on the Maintenance tab
The confirmation message appears.
4.
Execute paper feed roller cleaning
Make sure that the printer is on and then click OK.
Paper feed roller cleaning starts.
5.
Complete paper feed roller cleaning
After the rollers have stopped, follow the message instructions and load one sheet of plain paper or a
cleaning sheet available on the market into the rear tray. Then click OK.
Paper will be ejected and feed roller cleaning will be completed.
70
To Next Page
Loading...
Need help?
General