62 Troubleshooting
Print Results Not Satisfactory
Cannot Print to End of Job
Part of the Page Is Not Printed
Colors Are Unclear
Cause Action
Size of the print data is extremely large
(Windows XP/Windows 2000 only).
In Windows XP and Windows 2000, click Print Options on the Page Setup
sheet. Then, select the Reduce spool data size check box in the displayed
dialog.
Selecting Reduce spool data size may reduce the print quality.
Cause Action
Page Size setting in the Operation
Panel does not match the actual size of
the paper loaded in the machine.
If the Page Size setting set in the Operation Panel does not match the actual
size of the printing paper, part of the page may not be printed.
Check the Page Size setting on the Operation Panel.
Cause Action
Media Type setting in the Operation
Panel does not match the actual type of
paper.
Check that the Media Type set in the Operation Panel (when performing
wireless printing, the Media Type setting in Wireless print settings) matches
the type of the loaded printing paper.
See “Changing the Print Settings” on page 17.
If you are printing a photograph or an illustration, incorrect Media Type setting
may reduce the quality of printout color. The quality of printout color may also be
reduced in borderless printing depending on the Media Type setting.
To Next Page
Loading...
Need help?
General
