Default Network Settings
LAN Connection Defaults
Item Default
Network name(SSID) BJNPSETUP
Wi-Fi security Disable
IP address (IPv4) Auto setup
IP address (IPv6) Auto setup
Set printer name* XXXXXXXXXXXX
Enable/disable IPv6 Enable
Enable/disable WSD Enable
Timeout setting 15 min.
Enable/disable Bonjour Enable
Service name Canon TR7000 series
LPR protocol setting Enable
RAW protocol Enable
LLMNR Enable
PictBridge communication (Enable/disable communication) Enable
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
LAN settings
Wireless Direct Defaults
Item Default
Network name(SSID) DIRECT-abXX-TR7000series *1
Password YYYYYYYYYY *2
Wi-Fi security WPA2-PSK (AES)
Connection request confirmation Displayed
*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is
specified when the printer is turned on for the first time.)
34