Playback/Erasing
177
Transition Effects
You can select the transition effect used when one image is replaced
by another.
* Default setting.
3
Play.
1. Use the , , or button to
select [Start].
2. Press the button.
• The following functions are available
during slide shows.
- Pausing/resuming the slide show: press the FUNC./SET
button.
- Fast forwarding/rewinding the slide show: press the or
button (continue to hold the button to switch between images
more rapidly).
- Stopping the slide show: press the MENU button.
No transition effect.
*
The new image gradually brightens as it moves upward from the
bottom.
The new image first appears in a cross shape and gradually
expands to display the full image.
Portions of the new image move horizontally, then the image
expands to display the full image.
In single image playback mode, you can start a slide show from
the current image displayed by holding the FUNC./SET button
while you press the button. Please note that if you do
this while the last image shot is displayed, the slide show will
start from the first image using the same date.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
