Canon Wireless File Transmitter WFT-E4 II A User Manual

24
Selecting the Communication Method and LAN Type
For [LinkedShot] instructions, refer to page 65. Note that no information about
[LinkedShot] is given in this chapter.
Turn the <5> dial to select the type of LAN, and
then press <0>.
Select [OK] and press <0> to go to the next
screen.
Wireless LAN
The [Wireless LAN setup method] screen is
displayed.
[Connect with wizard]: See p.25
[WPS (PBC mode)]: See p.27
[WPS (PIN mode)]: See p.28
Select [WPS (PBC mode)] or [WPS (PIN mode)]
when using a wireless LAN terminal compatible with
Wi-Fi Protected Setup (WPS).
Wired LAN
The [Network] settings screen is displayed. If you have selected a wired network, refer to page
29, “Configuring Network Settings.”
Use a Category 5 or higher STP LAN cable. (STP: Shielded Twisted Pair)
Selecting the LAN Type
COPY

Canon Wireless File Transmitter WFT-E4 II A Specifications

General

Brand	Canon
Model	Wireless File Transmitter WFT-E4 II A
Category	Transmitter
Language	English