3
49
English
Note:
• To delete a playlist and/or the settings from a preset button, please press
and hold the relating button for 10 seconds until the corresponding preset
[P1], [P2] or [P3] is shown in the display rapidly flashing.
AUTOMATIC UPDATES
After you have connected the Smart Amp 5.1 to the network, firmware updates
are executed automatically. After each connection to the power supply and at
regular intervals (also in standby mode), the Amp 5.1 searches for an update
and installs this, if available. The LED flashes green/red during the update and
the display first shows „DOWNLOADING“, then „UPDATING“. During this time
the Smart Amp 5.1 is not operable.
To do this, the Smart Amp 5.1 must have been connected to the network
router via the Google Home app or an iOS device (by use of WLAN) or
alternatively by a network cable (by use of LAN).
Attention:
• Do NOT disconnect the Smart Amp 5.1 from the power supply during an
update process!
Note:
• The Amp 5.1 contains a multitude of other great functions. All settings can
be found in the detailed instruction manual. This can be found under:
www.canton.de/manual/amp5.1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
