Canton Smart Amp 5.1 Short Manual

We, the manufacturer/importer
Canton Elektronik GmbH + Co. KG • Neugasse 21–23 • 61276 Weilrod • Germany
confirm and declare in sole responsibility that the product
Smart Amp 5.1
(Audio/video amplifier with multiple signal inputs and outputs, wireless audio transmitter,
WiFi module and Ethernet connection, Bluetooth® wireless technology,
internal switch mode power supply and infrared remote control)
is in accordance with the Directives of the European Parliament and of the Council
Directive 2014/53/EU (Radio Equipment)
Directive 2014/35/EU (Low Voltage Directive)
Directive 2011/65/EU (Restriction of the Use of Certain Hazardous Substances)
Directive 2012/19/EU (Waste Electrical and Electronic Equipment)
Directive 2009/125/EG (Ecodesign requirements for Energy-related Products)
Operation is permitted in all countries of the European Union.
A complete Declaration of Conformity can be found at: www.canton.de/en/doc
Legally binding signature:............................................................
Date: 01
st
June 2021 Name: Günther Seitz Function: Managing Director
EU Declaration of Conformity
The Bluetooth
®
word mark and logos are registered
trademarks owned by the Bluetooth
®
SIG, Inc. and any
use of such marks by Canton is under license.
Other trademarks and trade names are those of their
respective owners.
Spotify Connect feature may not be used in countries
where Spotify service is not available.
The Spotify software is subject to third party licenses
found here:
http://www.spotify.com/connect/third-party-licenses
Google, Google Home and Chromecast built-in
are trademarks of Google LLC.
Apple, AirPlay, iPhone, iPad, iPod touch, HomePod,
Apple TV, Mac, iTunes, Apple Music, Siri, macOS, and
tvOS are trademarks of Apple Inc., registered in the U.S.
and other countries. IOS is a trademark or registered
trademark of Cisco in the U.S. and other countries and is
used under license.
Use of the Works with Apple badge means that an
accessory has been designed to work specifically with
the technology identified in the badge and has been
certified by the developer to meet Apple performance
standards.
To control this AirPlay 2–enabled accessory, iOS 11.4 or
later is required.
LICENSE INFORMATION

Canton Smart Amp 5.1 Specifications

General

Video in	3x HDMI
Video out	1x HDMI
Ethernet LAN (RJ-45) ports	1
Speakers connectivity type	-
Product color	Black
Volume control	Touch
Cables included	AC
Treble adjustment	Yes
Connectivity technology	Wired & Wireless
Audio decoders	DTS-HD, Dolby Atmos
Audio output channels	- channels
Peak power per channel	600 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	- %

Weight and Dimensions

Depth	154 mm
Width	245 mm
Height	120 mm
Weight	5240 g