Carel easy way aria User Manual

28
GB
easy way ARIA +030220841 - rel. 1.0 - 26.10.2007
4.5 Setting the parameters
The terminal features a series of internal parameters to customise the
device according to the type of use.
The parameters are divided into two categories:
User – parameters modi able by the user without entering the •
password
Factory – parameters modi able only after having entered the •
password
Key:
+
Pressing the buttons together for 3 s accesses the
parameters menu
Multifunction
Set and con rm changes
UP
Increase parameter value/index
DOWN
Decrease parameter value/index
Tab. 4.t
Access
Fig. 4.f.a
To access parameter programming mode
pressing buttons 3 (FRESH AIR) and 6 (DOWN) together for 5 seconds•
The display will show:
in the secondary  eld, the index of the parameter (loc n), where n is •
the index.
in the main  eld, the value of the parameter and its unit of measure, •
°C/°F or %rH
To exit parameter programming mode:
By time, 30 sec after the last button was pressed•
manually by pressing the button •
Editing the user parameters
Fig. 4.f.b

Carel easy way aria Specifications

General

Brand	Carel
Model	easy way aria
Category	Controller
Language	English