EasyManuals Logo
Home>Casio>Watch>5713

Casio 5713 User Manual

Casio 5713
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
Hand Alignment
Adjustment
Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the display. If this
happens, adjust hand alignment.
Using the CASIO WATCHES
Phone App to Adjust Hand
Alignment
If the watch is paired with a phone, you can
also use CASIO WATCHES to adjust hand
alignment.
l
Adjusting Hand Alignment
Adjusting Hand Alignment
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out.
The currently selected Home City will
appear on the display.
This causes the second hand to move
to 12 o’clock.
Crown
Home City
3. Hold down (A) for at least five seconds.
Release the button when [HAND SET]
appears on the display and the second
hand completes one full rotation.
[HAND ADJ] flashes, and hour, minute,
and second hand auto calibration starts.
After auto alignment is complete, the
hands should be in the positions shown
below.
Hour handMinute hand
Second hand
4. Push the crown back in and then lock it.
This returns the hands to normal
timekeeping.
Note
If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
Important!
After hand position adjustment is
complete, check to make sure that the
proper time is being indicated in the
Timekeeping Mode by the hands and
on the display. If the hands are
misaligned, perform steps 2 through 4
again.
Other Settings
This section explains other watch settings you
can configure.
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out.
The currently selected Home City will
appear on the display.
Crown
Home City
3. Press (B) twice.
This causes [KEY♪] or [MUTE] to flash on
the display.
4. Rotate the crown to select either [KEY♪]
or [MUTE].
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
5. Push the crown back in and then lock it.
Watch Operation Guide 5713
48

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio 5713 and is the answer not in the manual?

Casio 5713 Specifications

General IconGeneral
BrandCasio
Model5713
CategoryWatch
LanguageEnglish

Related product manuals