Note
●
If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
●
Note that alarm and timer tones will still
sound even while the operation tone is
muted.
Configuring Power Saving
Function Settings
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out.
The currently selected Home City will
appear on the display.
3. Press (B) six times.
This displays [P.SAVE].
4. Rotate the crown to turn the setting on or
off.
[ON]: Power Saving enabled.
[OFF]: Power Saving disabled.
5. Push the crown back in and then lock it.
Note
●
If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
●
For details about Power Saving, refer
to the information below.
l
Power Saving Function
Resetting Watch Settings
This section explains how to return the watch
settings below to their initial factory defaults.
●
Watch Settings
●
Compass
●
Altimeter
●
Barometer
●
Thermometer
●
Altitude recording
●
Stopwatch
●
Timer
●
Alarm
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Loosen the crown and then pull it out.
The currently selected Home City will
appear on the display.
3. Hold down (D) for at least seven seconds.
Release the button when the displayed
message changes from [CLEAR ALL] to
[CLEAR].
4. Push the crown back in and then lock it.
Important!
●
Reset cannot be performed while
Mission Log is enabled.
l
Recording Waypoints and Their
Altitudes (Mission Log)
Note
●
If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
●
Resetting the watch will also delete
information for pairing the watch with a
phone, and unpair them.
Watch Operation Guide 5713
49