E-22
Adjusting the Laser Light Emission Width
The emission width of the laser light emitted by the Handheld Terminal can be adjusted.
Adjust the emission width when it has been changed.
The mouse emulator function can also be used to make the adjustment.
1. Use the “
”/“ ” keys to move the focus to the [Start]
icon and press the Enter key. Then navigate to Settings
➝
Control Panel with the Enter key to bring up the
Control Panel.
2. Move the focus to the [Scanner Setting] icon and press
the Enter key. The display appears as shown at right.
3. Use the “
”/“ ” keys to move the focus to the tabs
and use the “<”/“>” keys to select the [Others] tab.
*
To Next Page
Loading...
Need help?
General