E-51
Charging Battery Pack
Use the separately sold AC adaptor (AD-S60160B) for the power supply of the Cradle-
type Dual Battery Charger.
1. Plug the cord from the AC adaptor into the AC adaptor jack of the Cradle-type Dual
Battery Charger.
2. Plug the AC cord into a wall outlet.
AC Adaptor Jack
AC Adaptor
3. Align the contacts on the bottom of the DT-X100 with the power contacts of the
Cradle-type Dual Battery Charger when inserting the unit.
- Check the charging status with Indicator 1 on the DT-X100.
Status of Indicator 1 on DT-X100
Orange: Charging the battery pack.
Red: Battery pack problem, or standby due to the surrounding temperature being
beyond the specied temperature range (charging resumes when the
temperature reaches the range).
Green: Charging the battery pack is complete.
To Next Page
Loading...
Need help?
General