Watch Settings
Use the procedure below to configure current
location time and Dual Time settings
manually.
Getting ready
Enter the Calendar Mode.
l
Navigating Between Modes
Setting the Time/Date
While the watch is connected to a phone, it will
automatically adjust its day and time settings
to those of the phone. If the watch is not
connected to a phone, use the procedure
below to adjust its day and time settings.
1.
Pull out the crown to the second click.
This causes the second hand to move to
[A] if the watch’s current time setting is
a.m., or [P] if it is p.m., and enables the
hour and minute setting operation.
2.
Rotate the crown to adjust the hour and
minute settings.
●
The Dual Time setting also changes in
accordance with the current time
setting. Crown operation is disabled
while the Dual Time hour and minute
hands are moving.
3.
Press (A).
This enables the month and day setting
operation.
4.
Press (B) to change the month.
30
DayMonth
12
6
1
11
5
7
2
10
48
39
5.
Rotate the crown to change the day.
6.
Press (A).
This enables the year 10’s digit setting
operation.
7.
Rotate the crown to change the year 10’s
digit.
30
00
60
10
5070
20
4080
90
Year (10’s digit)
8.
Press (A).
This enables the year one’s digit setting
operation.
9.
Rotate the crown to change the year one’s
digit.
0
6
1
57
2
48
9
3
Year (one’s digit)
10.
On a time signal at the top of a minute,
push the crown back in.
Note
●
The day of the week is set
automatically in accordance with the
year, month, and day settings.
Configuring Dual Time
Settings
Dual Time lets you keep track of the current
time in another time zone in addition your
current location time.
30
Dual Time
Dual Time 24-hour
1.
Pull out the crown to the first click.
This causes the second hand to move to
12 o’clock.
2.
Rotate the crown to change the Dual Time
setting.
●
You can set the Dual Time in 15-minute
increments.
Crown
Dual Time 24-hour hand
Dual Time minute hand
Dual Time hour hand
3.
Push the crown back in.
Operation Guide 5560
11
To Next Page
Loading...
Need help?
General