Moving to Another Time
Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
●
Before Boarding
1.
Configure the World Time (Dual Time) to
the current time at your destination.
Destination time
Current time
30
l
Using CASIO WATCH+ to Configure
Settings
l
Using Watch Operations to Configure
Settings
2.
Disable auto time adjustment.
l
Using CASIO WATCH+ to Configure
Settings
●
After Arriving
1.
Swap the origin time zone time with the
destination time zone time.
30
30
After swappingBefore swapping
Destination time
Destination time
l
Using CASIO WATCH+ to Configure
Settings
l
Using Watch Operations to Configure
Settings
2.
Enable auto time adjustment.
l
Using CASIO WATCH+ to Configure
Settings
Other Information
This section provides non-operational
information you also need to know. Refer to
this information as required.
Summer Time Switching
●
Connecting with a Phone to Switch
After the watch is connected with a phone,
summer time switching of Home City time and
World Time is performed in accordance with
the CASIO WATCH+ setting (Auto/ON/OFF)
as described below.
Auto :
After the watch is connected with a phone,
summer time is displayed for the current
location time or World Time when it is within
the summer time period. Otherwise standard
time is displayed.
ON :
The watch always displays summer time.
OFF :
The watch always displays standard time.
●
Auto Summer Time Switching
When the watch is connected to a phone, it is
sent summer time period information for your
Home City. If there is a World Time City
specified with CASIO WATCH+, information
for that city will also be sent. If the CASIO
WATCH+ summer time setting is “Auto”, the
watch will automatically keep track of the
summer time period and perform summer time
switching automatically, even if it is not
connected with the phone.
Supported Phones
For information about phones that can
connected with the watch, visit the CASIO
website.
http://world.casio.com/os_mobile/wat/
Specifications
Accuracy at normal temperature :
±15 seconds per month average when time
adjustment by communication with a phone
is not possible.
Timekeeping :
Hour and minute (move at 10-second
intervals), second, day (2000 to 2099 full
auto calendar), day of the week
Dual Time :
Hour, minute, swapping with Home City
time
Stopwatch :
Measuring unit: 1 second
Measuring capacity: 23:59’59” (24 hours)
Measurement functions: Elapsed time, split
times
Timer :
Measuring unit: 1 second
Countdown range: 24 hours
Setting unit: 1 minute
Time up: 10-second beeper
Alarm :
Setting units: Hours, minutes
Beeper: 10 seconds
Mobile Link :
Auto Time Correction
Time setting adjusted automatically at
preset time.
One-touch Time Correction
Manual connection and time adjustment
Phone finder
Watch operation sounds the alert sound
of the mobile phone.
World Time
Current time for a selection of
approximately 300 cities
Home Time/World Time swapping
Auto Summer Time Switching
Automatic switching between standard
time and summer time.
Stopwatch data transfer
1/1000-second Stopwatch:
100 lap/split time records (date and time,
lap/split time, lap number)
Timer Settings
Alarm Settings
Hand alignment correction
Data Communication Specifications
Bluetooth
®
Frequency Band: 2400MHz to 2480MHz
Maximum Transmission: 0 dBm (1 mW)
Communication range: Up to 2 meters
(depends on environment)
Operation Guide 5560
15
To Next Page
Loading...
Need help?
General