Casio Edifice EQB-900DB-2AER User Manual

●
Configuring the Summer Time Setting
1.
Y
On the Home Screen, tap the “CASIO
WATCH+” icon.
2.
X
Hold down (C) for about two seconds.
●
The second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
●
The second hand will move from [R] to
e
when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure the summer
time setting.
Note
●
When “Auto” is selected for
standard/summer time switching,
the watch will switch between
standard time and summer time
automatically. You do not need to
change the time setting manually for
changes between summer time and
standard time. Even if you are in an
area that does not observe summer
time, you can leave the watch’s
summertime setting as “Auto”.
●
Changing the time setting manually
with a watch operation will cancel
auto standard time/summer time
switching.
●
A CASIO WATCH+ screen shows
information about summer time
periods.
●
Swapping Your World Time and Home
Time
1.
Y
Tap the “CASIO WATCH+” icon.
2.
X
Hold down (C) for about two seconds.
●
The second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
●
The second hand will move from [R] to
e
when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
30
30
After swappingBefore swapping
World Time
World Time
Home Time
Home Time
Note
●
Auto time adjustment is not
performed for 24 hours after
swapping of the Home Time and
World Time.
Viewing Stopwatch Data
This section explains how to send lap times
and split times (up to 100 records) stored in
watch memory, and other data to your phone
for viewing with CASIO WATCH+.
●
Sending Stopwatch Data to a Phone
Use the procedure below to send data from
the watch to a phone.
1.
Y
Tap the “CASIO WATCH+” icon.
2.
X
Hold down (C) for about two seconds.
●
The second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
●
The second hand will move from [R] to
e
when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to transfer data measured
by the watch to the phone.
After data transfer is complete, a list of the
measurement data will appear on the
phone display.
●
Tapping a stopwatch data item displays
its details.
●
Checking a Lap Time
Use CASIO WATCH+ to check the data you
sent to the phone.
1.
Y
Tap the “CASIO WATCH+” icon.
2.
Y
Perform the operation shown on the
phone screen to view the measurement
data you want.
Note
●
Tapping “Edit” displays a screen that
you can use to change the data item
title and to delete lap time data.
Operation Guide 5560
7

Casio Edifice EQB-900DB-2AER Specifications

General

Brand	Casio
Model	Edifice EQB-900DB-2AER
Category	Watch
Language	English