101
PLAYING AN AUDIO FILE (EX-M2 Only)
Selecting a Specify Track for Playback
You can use the following procedure to display a list of avail-
able tracks and select one of them for playback.
1.
While AUDIO mode
playback is stopped
or paused, click the
camera’s controller.
• This turns on the
monitor screen, which
shows a list of informa-
tion about each track,
including track number,
track name, and play
time.
2.
Rock the controller up or down to move the
highlighting to the track you want to select.
• If move the highlighting to the top or the bottom of the
list, the list will scroll to show other tracks.
Currently selected track
Specifying the Audio Playback Mode
You can use the following procedure to select one of three
playback modes: normal playback, all-track repeat, or 1-
track repeat.
1.
In the AUDIO mode, start audio playback.
• The initial default mode is normal playback.
2.
Press the remote controller’s playback mode
button to cycle through the playback modes.
The playback mode indicator on the LCD indi-
cates the currently selected mode.
To do this:
Play all tracks in order
and then stop
Play all tracks in order
in an endless loop
Play the current track
in an endless loop
Select this
mode:
Normal
All-track repeat
1-track repeat
Which is
indicated by
this icon:
Off
To Next Page
Loading...
Need help?
General
