APPENDIX
110
Power does not turn on.
Camera suddenly powers
down.
Image is not recorded when
the shutter release button is
pressed.
Camera powers down dur-
ing self-timer countdown.
Recorded images are not
saved in memory.
The battery is dead.
1) Auto Power Off activated (page 29).
2) The battery is dead.
1) Mode selector is set to “PLAY” or “AUDIO”.
2) Flash unit is being charged.
3) Memory is full.
The battery is dead.
1) Camera powers down before the save operation
is complete.
2) Removing the memory card before the save op-
eration is complete.
Charge the battery (page 24). If the battery goes
dead soon after being charged, it means the battery
has reached the end of its life and needs to be re-
placed.
Purchase a separately available NP-20 recharge-
able lithium ion battery.
1) Turn power back on.
2) Charge the battery (page 24).
1) Align the mode selector with “REC”.
2) Wait until the flash unit finishes charging.
3) Transfer files you want to keep to your computer
and then delete files from camera memory, or
use a different memory card.
Charge the battery (page 24).
1) When the battery indicator shows
, charge
the battery as soon as possible (page 24).
2) Do not remove the memory card before the save
operation is complete.
Power Supply
Image Recording
Symptom Possible Cause Action
Troubleshooting Guide
To Next Page
Loading...
Need help?
General
