PLAYING AN AUDIO FILE (EX-M2 Only)
102
Specifying the Track Playback Sequence
Normally, all tracks in memory are played back in the order
they are saved. You can use the following procedure to cre-
ate a play list that tells the camera the sequence to use when
playing back AUDIO mode tracks.
1.
On your computer, use your word processor or
another text editor to create a file named
“PLAYLIST.TXT”.
2.
Configure the play list by specifying the tracks
you want to play in the sequence you want to
play them.
• See “Example PLAYLIST.TXT File Contents” on page
103 for information about how to configure a play list.
3.
Place the camera onto the USB cradle and es-
tablish a link with your computer (page 90).
4.
Place the “PLAYLIST.TXT” file into the “AUDIO”
folder of the camera.
3.
Press the remote controller’s [ ] button to
start playback from the currently selected
track.
NOTE
• The monitor screen turns off automatically if you do
not perform any operation for about 10 seconds.
To Next Page
Loading...
Need help?
General
