62
Snapshot Tutorial
. Using the Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene menu and then rotate the zoom controller in
either direction.
• To return to the scene menu, rotate the zoom controller
again.
• To scroll between scenes, use [4] and [6].
• To configure the camera with the settings for the currently
selected scene, press [SET].
NOTE
• Depending on the “ART SHOT” scenes, some of the items on the menu that
appears may not be usable.
• With this “ART SHOT” scene, the flash setting automatically becomes
?
(Flash
Off).
• With HDR Art Movie, the “Movie Quality” setting can be either “HD” or “STD” only
(page 96). When any “Movie Quality” setting other than “STD” is selected in
another mode, the “HD” setting is used when shooting with HDR Art Movie.
• When using “HDR Art” for movie recording, the intensity of the art effect is fixed in
accordance with movie settings.
You can configure the camera to save two images when shooting with HDR Art: one
image with HDR Art effects applied in accordance with the scene you selected plus
another normal (Program Auto) image without any effects applied.
1. Align the mode dial with [C] and then press [MENU].
2. Press [4], use [8] and [2] to select the “
r
REC MENU” tab, and then
press [6].
3. Use [8] and [2] to select “Double (HDR Art)” and then press [SET].
4. Use [8] and [2] to select “On” and then press [SET].
While “Off” is selected for the above step, only a single HDR Art image is saved
(normal image not saved).
5. Press the shutter button to shoot.
Saving a Second Normal Image When Shooting With HDR Art
(Double (HDR Art))
To Next Page
Loading...
Need help?
General
Weight and Dimensions
