E-28
2. Remove Mounting Hook C.
3. Pass the stylus holder through the strap
as shown in the illustration.
4. Fold back the strap after passing through
Bracket C, and then fasten in the same
way it was originally fastened with
Bracket A and Bracket B.
• Do not pass the strap through the stylus
holder when folding it back.
• Place the stylus in the stylus holder after
first re-attaching the neck strap to the
Handheld Printer Terminal.
Important!
• Do not swing the Handheld Printer Terminal with the neck strap.
Attaching the Neck Strap
To Next Page
Loading...
Need help?
General
