Playing a Built-in Song
EN-19
1.
While a song is playing, press HOME.
The selected tone number and instrument name will
appear on the display.
2.
Rotate the dial to select a tone.
• For tone information, see the “Tone List” (page
EN-45).
• After you rotate the dial once to select an option, you
also will be able to change the selection using the –
and + buttons.
• To return to the first tone in the tone list, press – and +
at the same time.
• To go back to the previous screen, press the BACK
button.
Use the procedure below to assign the song tone to the
keyboard so you can play along.
1.
While a song is playing or stopped, long-press
FUNCTION.
This momentarily displays “RECOMMENDED” and
assigns the song tone to the keyboard.
2.
Play along with the song.
• Tone sync also applies the song’s reverb setting to
keyboard play.
• Changing the tone setting or to another song will
automatically disable tone sync.
You can turn off the right-hand part or the left-hand part of a
song you are playing and practice along with the remaining
part. Use this when you feel that a song is initially too difficult
for you to play with both hands at the same time.
1.
While a song is playing or stopped, press the
PART button.
Each press of the PART button cycles through the
settings shown below.
Changing the Keyboard Tone While a Song is
Playing
Assigning the Song Tone to the
Keyboard (Tone Sync)
Practicing a Song Part
Right-hand part off
Left-hand part off
Both parts muted
Both hand parts on
To Next Page
Loading...
Need help?
General
