EN-37
■ Sounding Input From an External Device on the
Digital Keyboard
Connection requires commercially available connecting cords,
supplied by you.
• The connecting cord should have a stereo mini plug (3-
pole) on one end for connection to the Digital Keyboard and
a plug that matches the configuration of the output jack of
external device on the other end.
• When sounding input from an external device with the
Digital Keyboard, use the external device controls to adjust
the volume level. In this case, you cannot adjust the volume
level on the Digital Keyboard.
• Turn off the Digital Keyboard before connecting.
Before turning power on or off, turn down the volume
level of the Digital Keyboard and external devices.
• After connecting, turn on the external device and then
the Digital Keyboard.
• If external device notes sounded by the Digital
Keyboard are distorted, lower the external device’s
volume level.
Use the procedure below to configure settings.
1.
Press FUNCTION.
This displays the [FUNCTION] screen.
2.
Use the U and I buttons to select a setting
item.
• To go back to the previous screen, press the EXIT
button.
3.
Rotate the dial to change the setting.
• After you rotate the dial once to select an option, you
also will be able to change the selection using the –
and + buttons.
• To go back to the previous screen, press the BACK
button.
4.
Press FUNCTION to exit the setting screen.
Stereo mini plug (3-pole)
Digital Keyboard AUDIO IN jack (3.5mm stereo mini jack)
Portable audio player, etc.
Configuring Function
Settings
Configuring Settings
To Next Page
Loading...
Need help?
General
