Playing with Different Tones
EN-9
To adjust the volume balance between
two layered tones
1.
While holding down the FUNCTION button,
use the keyboard keys shown below to adjust
the volume of the layered tones.
• To return the volume setting to its initial default, hold
down the FUNCTION button and press both of the
keys at the same time.
• For details about using the keyboard keys for
settings, see “Keyboard Keys Used for Configuring
Settings” (page EN-26).
To apply a hall simulator (PX-870)
1.
While holding down the FUNCTION button,
press the keyboard key that corresponds to
the hall simulator name you want to select.
To apply Reverb (PX-770)
1.
Each press of the REVERB button toggles
reverb between on and off.
• Reverb is applied when it is turned on.
■ To select the reverb type
1.
While holding down the FUNCTION button,
press the keyboard key of the reverb type to
be applied.
1: Room
2: Small hall
3: Large hall
4: Stadium
Center
Volume of the main tone
(First tone you selected)
Volume of the layered tone
(Second tone you selected)
Using Effects
Hall simulator (PX-870)
Reverb (PX-770)
: Makes your notes resonate.
Chorus : Adds more breadth to your
notes.
Hall simulator
Name
Description
DUTCH CHURCH Amsterdam church with acoustics
that are suitable for music
STANDARD HALL Standard concert hall
BERLIN HALL Berlin arena type classic concert hall
FRENCH
CATHEDRAL
Large gothic cathedral in Paris
To Next Page
Loading...
Need help?
General
Weight and Dimensions
