EasyManuals Logo
Home>Casio>Musical Instrument>Privia PX-770

Casio Privia PX-770 User Manual

Casio Privia PX-770
63 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
EN-5
Power Outlet
After you finish assembling the stand, turn on the
Digital Piano. For details, see “Getting Ready” on page
EN-49.
1.
Press the P (POWER) button to turn on
Digital Piano power.
The power lamp lights and the Digital Piano powers
up. The power up operation takes about 5 seconds.
2.
To turn off the Digital Piano, hold down the
P (POWER) button until the power lamp
goes out.
NOTE
Pressing the P (POWER) button to turn off power
actually puts the Digital Piano into a standby state.
Minute amounts of current continue to flow within
the Digital Piano in the standby state. If you do not
plan to use the Digital Piano for a long time or if
there is a lightning storm in your area, be sure to
unplug the AC adaptor from the power outlet.
Auto Power Off
This Digital Piano is designed to turn off automatically
to avoid wasting power after no operation is
performed for a preset amount of time. The Auto
Power Off trigger time is about four hours.
You also can use the procedure below to temporarily
suspend Auto Power Off.
To disable Auto Power Off
1.
While the Digital Piano is turned on, press the
P (POWER) button to turn it off.
2.
While holding down the FUNCTION button,
press the P (POWER) button to turn on the
Digital Piano.
Auto Power Off will be disabled at this time.
NOTE
Turning off the Digital Piano after performing the
above steps will re-enable Auto Power Off.
Perform the following procedure when you want to
return the Digital Piano’s stored data and settings to
their initial factory defaults.
1.
Turn off the Digital Piano.
2.
Holding down the FUNCTION, MIDI REC and
E.PIANO 1 buttons, press the P (POWER)
button.
3.
Hold down the FUNCTION, MIDI REC and
E.PIANO 1 buttons until the E.PIANO 1 lamp,
and then the GRAND PIANO lamp, and then
the R lamp start to flash.
After some time, the flashing will stop.
4.
Release the FUNCTION, MIDI REC and
E.PIANO 1 buttons.
The Digital Piano will initialize its internal system.
You will be able to use the Digital Piano in a short
while.
NOTE
See “Turning Power On or Off” (page EN-5) for
information about turning power on and off.
Turning Power On or Off
Returning the Digital Piano to
Its Factory Default Settings

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio Privia PX-770 and is the answer not in the manual?

Casio Privia PX-770 Specifications

General IconGeneral
Product colorWhite
USB portYes
Headphone outputs2
USB connector typeUSB Type-B
Keys quantity88 keys
Number of keyboard sensitivity levels3
Sound effectsBrilliance, Chorus, Flanger/Digital Signal Processing (DSP), Reverberation
Tones quantity19
Brilliance type-3 to 0 to 3
Tweeter diameter120 mm
Metronome tempo range20 - 255 bpm
Amplifier output power16 W
Metronome beats per bar0, 9
Maximum polyphony (notes)128
Music memory capacity (songs)10
Reverberation effects quantity4
Adjustable tone range (octaves)-2 - 2
Demo songs quantity60
Mobile operating systems supportedAndroid, iOS
Recorder/sequencer number of songs1
Power consumption (min)18 W
Weight and Dimensions IconWeight and Dimensions
Depth299 mm
Width1391 mm
Height798 mm
Weight31500 g

Related product manuals