EN-59
Digital Piano Operations
Operation Lock disables button operations, except for the
1P (Power) button and the button operations required to
unlock operations.
■ To lock operations
1.
Hold down the bp^ button until “[FUNCTION]”
appears on the display.
This enters the FUNCTION Mode.
2.
Use the bk U and bl I buttons to select the
following menu items in sequence: “SYSTEM”
3 “Operation Lock”.
3.
Use the bk – and bl + buttons to change the
displayed setting from “Off” to “On”.
4.
To exit the FUNCTION mode, hold down
bp EXIT until “[FUNCTION]” disappears from
the display.
■ To unlock operations
1.
Hold down the bp^ button until “[FUNCTION]”
appears on the display.
This enters the FUNCTION Mode.
The display appears as shown below when an operation
is locked.
2.
Use the bk – and bl + buttons to change the
displayed setting from “On” to “Off”.
3.
To exit the FUNCTION mode, hold down
bp EXIT until “[FUNCTION]” disappears from
the display.
Use the FUNCTION parameters below to change the Digital
Piano’s MIDI settings. For information about FUNCTION
parameters, see “Configuring Function Settings (FUNCTION
Mode)” (page EN-53).
Using Operation Lock
[
FUNCT I ON
]
–
On
+
O
p
erat ion Lock
Configuring MIDI Settings
Setting FUNCTION Parameter
Keyboard Channel
This setting specifies a channel
from 1 through 16 as the MIDI
channel that can be used for
sending data to an external
device.
Keyboard Chan
(number 89)
Local Control
When this setting is turned off,
performance information (MIDI
data) is sent from the Digital
Piano, but no Digital Piano
sound is output. This setting is
for when you only want to send
MIDI data to an external device.
Local Control (number 90)
Hi-Reso Velocity MIDI Out
This setting enables/disables
high-resolution MIDI output of
touch pressure (velocity) when
keyboard keys are pressed.
Hi-Reso MIDI Out
(number 91)
Accomp MIDI Out
Enabling this setting outputs
Auto Accompaniment
information as MIDI data.
Accomp MIDI Out
(number 92)
To Next Page
Loading...
Need help?
General
