USB Flash Drive
EN-64
■ To delete USB flash drive data
1.
Perform steps 1, 2, and 3 under “To save
Digital Piano data to a USB flash drive” (page
EN-63).
2.
Use the bk U and bl I buttons to display
“Delete” and then touch bm ENTER.
3.
Use the bk U and bl I buttons to display a
sub-menu item that correspond to the type of
data being deleted, and then touch bm ENTER.
• See the “Displayed Type Name” column in the table
under “USB Flash Drive 3 Digital Piano” (page
EN-62).
4.
Use the bk – and bl + buttons to select the
data to be deleted, and then touch bm ENTER.
This displays “Sure?”
5.
To delete the data, touch bl +.
• To cancel the operation, touch bk –.
• Touching bl + displays “Wait” (operation in progress).
Do not perform any operation while this message is
displayed. “Complete” is displayed after the operation
is complete.
6.
To exit the MEDIA mode, hold down bp EXIT
until “[MEDIA]” disappears from the display.
■ To rename USB flash drive data
1.
Perform steps 1, 2, and 3 under “To save
Digital Piano data to a USB flash drive” (page
EN-63).
2.
Use the bk U and bl I buttons to display
“Rename” and then touch bm ENTER.
3.
Use the bk U and bl I buttons to display a
sub-menu item that correspond to the type of
data being renamed, and then touch
bm ENTER.
• See the “Displayed Type Name” column in the table
under “USB Flash Drive 3 Digital Piano” (page
EN-62).
4.
Use the bk – and bl + buttons to select the
data to be renamed, and then touch
bm ENTER.
5.
Rename the file.
• For information about text editing, see “Text Character
Input” (page EN-13).
• To exit text editing and return to step 4, touch
bp EXIT while the bk U and bl I buttons are
displayed (for cursor movement). If you previously
made changes to the file name, the message
“Cancel?” will appear. Touch bl + to exit editing.
6.
To apply the new file name, touch cl STORE.
This displays “Sure?”
• The message “Replace?” will appear if there is already
data with the same name on the USB flash drive. If this
happens, touching bl + in step 7 below will overwrite
the existing data with the new data.
7.
To change the name, touch bl +.
• To cancel the operation, touch bk –.
• Touching bl + displays “Wait” (operation in progress).
Do not perform any operation while this message is
displayed. “Complete” is displayed after the operation
is complete.
8.
To exit the MEDIA mode, hold down bp EXIT
until “[MEDIA]” disappears from the display.
To Next Page
Loading...
Need help?
General
