– 69 –
To send all data items in specific modes
1. Press SHIFT FUNC and then select “Send all”.
2. Use Kand Lto move the pointer to the mode whose data items you want to
send, and then use Hand Jto change the setting.
• Data in modes set to “Yes” will be sent, while data in modes set to “No” will not.
3. Press OK.
• A message appears asking if you are ready to send.
4. Press Y to start the send operation, or N to abort.
• To interrupt the send operation at any time, press ESC.
• After the send operation is complete, the display returns to the screen that was
on the display before you started the send operation.
To send Calendar data (highlights)
1. In the Calendar Mode, press FUNC and then select “Send (Holidays)”.
• A message appears asking if you are ready to send.
2. Press Y to start the send operation, or N to abort.
• To interrupt the send operation at any time, press ESC.
• After the send operation is complete, the display returns to the screen that was
on the display before you started the send operation. Then you can repeat the
above procedure to send another item.
■ Sending All Data Items In a Mode
The procedure you should use depends on whether the file whose data items you are
sending has multiple files (Telephone Directory, Memo, To Do, Expense Manager)
or not (Schedule, Reminder).
Pointer (selected file)
Marker (current setting)
To Next Page
Loading...
Need help?
General
