– 13 –
V-R200 / VER.2
1.
HARDWARE TEST
1-1. List of test items
Test items Remarks
1-2. Installing the Test Application
To be prepared
Flash memory (USB memory or SD card),
Test application “FuncTest843_0100000003.apk”
1-3. About the Test Application
1-4. Touch panel calibration
1-5. Test Method
Preparation Before Testing
Button
Touch Panel
LCD
Backlight
USB Storage To be prepared USB memory
Internal Storage
SD Card To be prepared SD card
Ethernet To be prepared
LAN cable
* Environment where DHCP connection is available.
Mac Address
COM 1, COM 2, COM 3 To be prepared Loop-back connector
Dallas Key To be prepared Dallas key
Drawer 1, Drawer 2 To be prepared Drawer
MCR To be prepared Magnetic card for testing
Speaker
Customer Display
Receipt Printer To be prepared Paper roll
Auto-Run
The tests from “Button” to “Receipt Printer” are automatically done in
succession.
1-6. Checking and Registering the Serial Number
1-7. Uninstalling the Test Application
To Next Page
Loading...
Need help?
General
