V-R200 / VER.1
– 5 –
3.
Information
3-1. Basic Operation
(1) General information
Fig. 1
Maintenance switch
Power switch
Power lamp
Reset switch
Fig. 2
• The power switch is pressed.
• When touching the touch panel.
• An alarm occurs.
• The reset switch is pressed.
¨ Reboot without shutdown
• The power switch is pressed.
• No operation is done for a certain period of time.
• The power switch is pressed.
• The reset switch is pressed.
¨ Reboot without shutdown
• The power switch is held down more than 5 sec.,
then choose "Power off".
• The maintenance switch is held down more than 5 sec.
OFF state
Power lamp: OFF
ON state
Power lamp: Green
Sleep state
Power lamp: Orange
NOTE: Power lamp: Red (Insuffi
cient capacity of the internal memory backup battery)
Do not shutdown the power supplied to the product or unplug the power cord.
NOTE: After taking out a product from carton box, connect AC adaptor to the product then leave it more than
6hours to charge internal memory buck up battery for full charge.
To Next Page
Loading...
Need help?
General
