15
The following three Eco Mode settings are available to specify whether priority should be given to
low-power, low-noise operation or lamp brightness.
Changing the Eco Mode Setting
1.
Press the [ECO] key.
This displays the Eco Mode selection window. The currently selected Eco Mode is the one
whose button is selected (filled in).
2.
Use the [] and [] keys to move the highlighting to the Eco Mode you want to
select, and then press the [ENTER] key.
This will select the button next to the highlighted Eco Mode name.
3.
To hide the window, press the [ESC] key.
(for USB port model users)
Use the setup menu (page 17) to select the Eco Mode when the input source is an external
device connected to the USB port or via the wireless adapter.
Eco Mode (Power Saving, Low Noise)
On (Level2): Gives maximum priority to low-power, low-noise operation.
On (Level1): Provides low-power, low-noise operation while maintaining lamp brightness to some
level.
Off : Gives maximum priority to lamp brightness.
To Next Page
Loading...
Need help?
General
