18
Basic Setup Menu Example
The procedure below shows how to configure the following three settings:
Image Adjustment 1 Contrast
Image Adjustment 1 Color Mode
Input Settings Signal Name Indicator
Note
Certain settings on the setup menu cannot be changed while there is no input signal to the
projector. Because of this, you should configure setup menu settings after selecting an input
source and starting projection.
This example covers basic steps only. For more detailed information, see “Setup Menu
Contents” on page 26.
To configure the “Image Adjustment 1 Contrast” setting
1.
Press the [MENU] key to display the setup menu.
2.
“Image Adjustment 1” is initially selected on the main menu, so simply press the
[ENTER] key.
3.
Use the [] key to select “Contrast”.
4.
Use the [] (lighter) and [] (darker) keys to adjust contrast.
To Next Page
Loading...
Need help?
General
