EasyManuals Logo
Home>Casio>Projector>XJ-V1

Casio XJ-V1 User Manual

Casio XJ-V1
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Useful Features and Functions
z Mercury-free Hybrid Light Source
A CASIO-original laser and LED hybrid light source delivers high luminance up to 2,700 lumens. This
projector does not use a mercury lamp, making it environmentally friendly.
z No-wait Projection
A CASIO hybrid light source reaches maximum brightness immediately after power is turned on,
compared with a wait of approximately one minute normally required with a mercury lamp. The light
source will even reach maximum brightness immediately if you turn it back on right after you turn it
off. A mercury lamp requires a longer wait in this case to cool down.
z Eco Mode
You can select from among five levels that provide different combinations that balance power
saving with projection brightness.
z Support for Three Input Sources
Analog RGB, component video (Y·Cb·Cr, Y·Pb·Pr), and HDMI input sources are supported.
z Vertical Keystone Correction
Manual adjustment to correct for vertical keystoning (distortion of the projected image shape
caused when projecting from below or above the projection surface) and return the projected image
to a rectangular shape.
z AUDIO OUT Terminal for Audio Output
Audio input via the projector’s HDMI terminal or AUDIO IN terminal is output from its AUDIO OUT
terminal. Amped speakers or other equipment can be connected to the AUDIO OUT terminal when
you want to output audio from another device via the projector.
z Ceiling Mounted and Rear Projection Support
The projector can be configured to project an image of normal orientation even when installed
upside down (for ceiling projection) or when projecting from behind the screen.
z Direct Power On
The projector can be configured to turn on automatically and start projecting as soon as it is
plugged into a power outlet.
z Firmware update
Firmware (software in the projector flash ROM) updates can be transferred to the projector from a
computer as required.
B

Table of Contents

Other manuals for Casio XJ-V1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Casio XJ-V1 and is the answer not in the manual?

Casio XJ-V1 Specifications

General IconGeneral
Matrix size0.55 \
Number of colors1.073 billion colors
Native aspect ratio-
Projection distance- m
Projection technologyDLP
Contrast ratio (dynamic)20000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Keystone correction, vertical-30 -30 °
FocusManual
Offset72 %
Throw ratio1.54 - 1.71:1
Optical zoom1.1 x
Focal length range- mm
Light source typeLaser/LED hybrid
Service life of light source20000 h
Full HDNo
Supported graphics resolutions1200 x 1600, 1680 x 1056
AC (power) inYes
Composite video in0
USB connector typeMicro-USB B
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level37 dB
Noise level (economic mode)35 dB
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Power sourceAC
Power consumption (standby)0.23 W
Power consumption (typical)150 W
Operating temperature (T-T)5 - 35 °C
Remote control typeIR
Weight and Dimensions IconWeight and Dimensions
Width270 mm
Height89 mm
Weight2800 g

Related product manuals