Make sure your instrument panel brightness control is in
the full bright position. See “Instrument Panel Brightness”
later in this section.
With Twilight §entinel@ turned on, you can idle the
vehicle with the lamps
off,
even when it’s dark outside.
First set the parking brake while the ignition is in
OFF.
Then start the vehicie. The lamps wiil stay
off
until
you release the parking brake.
Twilight Sentinel@ also provides exterior illumination as
you leave the vehicle.
If
Twilight Sentinel@ has turned
on
the lamps when you turn
off
the ignition, your lamps
will remain on until:
The exterior lamp switch is moved from
OFF
to the
parking lamp position,
or
a delay time that you select has elapsed.
See
Driver
Information Center
@IC)
on page
3-44
to
select the delay time that you want. You can also select
no delay time.
If you turn
off
the ignition with the exterior lamp switch
in the parking lamp or headlamp position, the Twilight
Sentinel@ delay will not occur. The lamps will turn
off
as
soon as the switch is turned
off.
As
with any vehicle, you should turn on the regular
headlamp system when you need it.
Interior
Lamps
Instrument Panel Brightness
This feature controls the brightness of the instrument
panel lights.
The knob for this feature is
located on the left side of
the instrument panel.
Push and release the knob and it will pop out. Turn the
knob clockwise to brighten the lights or counterclockwise
tu
UII
I1
11
lei-I-I.
I
-
..I.
._
IIL
.
Be sure not to have this knob turned all the way down
with the lamps on during the day. Your Driver
Information Center (DIC) may not be visible.
3-1
5
To Next Page
Loading...
Need help?
General
