Interior Plastic Components
Care of Safety Belts
Use only a mild Soap and water solution on a soft cloth Keep belts clean and
d
or sponge. Commercial cleaners may affect the
surface finish.
Security Shade and Convenience Net
Wash with warm water and mild detergent, rinse
with cold water and tumble dry on low.
Do
not use
chlorine bleach.
Glass Surfaces
Glass should be cleaned often.
GM
Glass Cleaner or a
liquid household glass cleaner will remove normal
tobacco smoke and dust films on interior glass. See GM
Vehicle Care/Appearance Materials
on
page
5-82.
L
-
not bleach or dye sa.
-
-y belts. If you do,
it
may severely weaken them.
In
a crash, they
might not be able to provide adequate
protection. Clean safety belts only with mild
soap and lukewarm water.
Weatherstrips
Notice:
Don’t
use
abrasive cleaners on glass,
Silicone grease on weatherstrips will make them last
because they may cause scratches. Avoid placing
longer, seal better, and not stick or squeak.
Apply
decals on the inside rear window, since they
silicone grease with a clean cloth at least every six
may have to be scraped
Off
later-
If
abrasive cleaners
months. During very cold, damp weather more frequent
electric defogger element may be damaged. Any Fluids and Lubricants
on
page
6-
13.
temporary license should not be attached across the
defogger grid.
---
-.--..I
--
+L-
:--:A-
+Le
..,;nAln,l,
cIn
att;
uacu
WII
LIIG
III~IUG
VI
~nns
nsun
WW~~~UVWW,
UIB
appiicaiion may
be requirea. See
Pari
E;
Eecuffui/e//&u’
5-77
To Next Page
Loading...
Need help?
General
