To Next Page

To Previous Page

{CAUTION:

Heater and radiator hoses, and other engine

parts, can be very hot. Do not touch them. If

you do, you can be burned.

Do not run the engine if there is a leak. If you

run the engine, it could lose all coolant. That

could cause an engine ﬁre, and you could be

burned. Get any leak ﬁxed before you drive the

vehicle.

If there seems to be no leak, with the engine on, check

to see if the electric engine cooling fan is running. If

the engine is overheating, the fan should be running. If

it is not, your vehicle needs service.

Notice: Engine damage from running your engine

without coolant is not covered by your warranty.

How to Add Coolant to the Coolant

Surge Tank

Notice: This vehicle has a speciﬁc coolant ﬁll

procedure. Failure to follow this procedure could

cause your engine to overheat and be severely

damaged.

If you have not found a problem yet, check to see if

coolant is visible in the surge tank. If coolant is visible

but the coolant level is not between the MIN and

MAX marks, add a 50/50 mixture of clean, drinkable

water and proper coolant at the coolant surge tank, but

be sure the cooling system, including the coolant

surge tank pressure cap, is cool before you do it. See

Engine Coolant on page 5-19 for more information.

5-25

Chevrolet 2005 Epica User Manual

Questions and Answers: