Cisco 1700 Hardware Installation Guide

SpecificationDescription
9.2 A peak at 100 V AC
5.2 A peak at 230 V AC
Maximum input current
950 VA at 100 V ACMaximum input volt amperes
1050 WMaximum output power
15 A (subcycle duration)Maximum inrush current
12 ms at 770 WMaximum hold-up time
36 WMaximum rated standby output
Climate Savers Platinum Efficiency (80 Plus Platinum
certified)
Efficiency rating
RSP2Form factor
IEC320 C13/C15Input connector
Hardware Specifications
The following table lists the hardware specifications for the 1700, 2700, and 4700.
Table 3: 1700, 2700, and 4700 Hardware Specifications
470027001700Specification
16.9 x 1.7 x 30 inches (42.9 x 4.3 x 76.2 cm)Dimensions (H x W x D)
36.0 lb (17.0 kg)34.1 lb (16.8 kg)
32.2 lb (16.6 kg)Weight
Operating: 50 to 95°F (10 to 35°C)
Maximum temperature is derated by 1°F/547 ft (1°C/300 m) of altitude above
3117 ft (950 m).
Nonoperating: –40 to 149°F (–40 to 65°C)
When the appliance is stored or transported.
Temperature
Operating: 8 to 90% noncondensing
Nonoperating: 5 to 95% noncondensing
Relative humidity
Operating: 0 to 10,000 ft
Nonoperating: 0 to 40,000 ft when the appliance is stored or transported
Altitude
5.8 Bels (measure A-weighted per ISO7779 LWAd)
Operation at 73°F (23°C)
Sound power level
Cisco Secure Firewall Management Center 1700, 2700, and 4700 Hardware Installation Guide
15
Overview
Hardware Specifications

Cisco 1700 Specifications

General

Brand	Cisco
Model	1700
Category	Network Router
Language	English