Contents
iv
Book Title
78-xxxxx-xx
Installation Checklist 2-10
Creating a Site Log 2-10
CHAPTER
3 Installing and Connecting the Router 3-1
What you Need to Know 3-3
Before You Begin 3-4
Unpacking the Router 3-4
Installing the Router in a Rack 3-4
Rack-Mounting the Chassis 3-5
Attaching Rack-Mount Brackets to Cisco 2010 CGR Routers 3-5
Mounting the Router in a Rack 3-6
Connecting Power 3-7
Connecting Power 3-7
Shutting Off Power 3-9
Connecting to a Console Terminal or Modem 3-10
Connecting to the Serial Port with Microsoft Windows 3-10
Connecting to the Console Port with Mac OS X 3-12
Connecting to the Console Port with Linux 3-13
Installing the Cisco Microsoft Windows USB Device Driver 3-13
Installing the Cisco Microsoft Windows XP USB Driver 3-13
Installing the Cisco Microsoft Windows 2000 USB Driver 3-14
Installing the Cisco Microsoft Windows Vista USB Driver 3-14
Uninstalling the Cisco Microsoft Windows USB Driver 3-15
Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver 3-15
Uninstalling the Cisco Microsoft Windows Vista USB Driver 3-15
Connecting to the Auxiliary Port 3-16
Connecting WAN and LAN Interfaces 3-17
Ports and Cabling 3-18
Connection Procedures and Precautions 3-18
CHAPTER
4 Configuring the Router 4-1
Powering up the Router 4-1
Checklist for Power Up 4-1
Power Up Procedure 4-2
Verifying the Power Supply Side LED Indications 4-3
Performing the Initial Configuration on the Router 4-3
Using Cisco Setup Command Facility 4-3
Completing the Configuration 4-6
To Next Page
Loading...
Need help?
General
