Cisco 3600 Series User Manual

Connecting Fast Ethernet PRI Network Modules to a Network 5-7
Connecting Fast Ethernet with Channelized T1 and CSU Modules to the Network
Connecting Fast Ethernet with Channelized T1 and CSU Modules
to the Network
Use a straight-through RJ-48C-to-RJ-48C cable to connect a CT1/PRI-CSU port to an
RJ-48C jack. (See Figure 5-7.)
Figure 5-7 Connecting a CT1/PRI-CSU Port to an RJ-48C Jack
1-Port Fast Ethernet and 1-Port Channelized E1/ISDN PRI
Balanced (120-ohm) or Unbalanced (75-ohm) Network
Modules
This section provides information about the following network modules for Cisco 3600
series modular routers.
• 1-port Fast Ethernet 1-port channelized E1/ISDN PRI balanced (120-ohm) network
module—Cisco product number NM-1FE1CE1B. (See Figure 5-8.)
• 1-port Fast Ethernet 1-port channelized E1/ISDN PRI unbalanced (75-ohm) network
module—Cisco product number NM-1FE1CE1U. (See Figure 5-8.)
LOOP
BACK
EN
FE–PRI
1FE-1CT1-CSU
LOCAL
ALARM
REMOTE
ALARM
CARRIER
DETECT
10/100BaseT
COLL
LINK
100Mbps
FDX
CTRLR 0
H7469
RJ-48C jack
CT1/PRI CSU
port (RJ-48C)

Cisco 3600 Series Specifications

General

Brand	Cisco
Model	3600 Series
Category	Network Router
Language	English