Cisco 7600 Series Guide

B-2
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
OL-10100-04
Appendix B Cable and Connector Specifications
Uplink Port Transceiver Modules
Uplink Port Transceiver Modules
Transceiver modules that plug into the front panel of the supervisor engine or route switch processor
provide the uplink ports for the router. Several types of transceiver modules are available:
small
form-factor pluggable (SFP) modules, X2 modules, XENPAK modules, and Gigabit Interface
Converter (GBIC) modules.
Table B-1 lists the orderable part numbers for supported transceiver modules. In addition, the following
tables provide information about the modules and their cabling specifications:
• Table B-2 and Table B-3 provide information about 1GE uplink ports.
• Table B-4 and Table B-5 provide information about 10GE uplink ports.
• Table B-6 provides information about 1GE GBIC modules.
Ta b l e B-1 Uplink Port Transceiver Modules
Supervisor Engine or RSP Transceiver Module Part Numbers
RSP720 and
RSP720-10GE
10GE Uplink Ports (RSP720-10GE only):
X2-10GB-SR
X2-10GB-LR
X2-10GB-ER
X2-10GB-LX4
X2-10GB-CX4
1GE Uplink Ports:
GLC-SX-MM
GLC-LH-SM
GLC-ZX-SM
GLC-T
GLC-BX-D
GLC-BX-U
SFP-GE-S
SFP-GE-L
SFP-GE-T
Supervisor Engine 720 GLC-SX-MM
GLC-LH-SM
GLC-ZX-SM
GLC-T

Cisco 7600 Series Specifications

General

Brand	Cisco
Model	7600 Series
Category	Network Router
Language	English