Cisco 8831 User Manual

•
Call forwarding is line specific. If a call reaches you on a line where call forwarding is not enabled, the
call rings as usual.
•
For more details about the following configurable call forward options, contact your system administrator:
◦
Allow calls placed from the call forward target number to the conference station to ring through,
rather than be forwarded.
◦
Prevent you from creating a call forward loop or exceeding the maximum number of links in a call
forwarding chain.
Forward calls
Procedure
Step 1
Press Fwd All.
Step 2
Enter the target phone number.
Depending on how your voicemail system is set up, you may be able to press Msgs to forward all calls to
voicemail.
A visual confirmation displays on the screen while call forwarding is active.
Step 3
To cancel call forwarding, press Fwd OFF.
Step 4
To forward calls remotely or to set conditions on fall forwarding, go to your User Options Web pages.
Call Park
Call Park allows you to use the conference station to park (temporarily store) a call. The parked call can be
retrieved from another phone in the Cisco Unified Communications Manager system, such as a phone at a
coworker’s desk or in a conference room.
You retrieve a parked call by entering the parking number for the call into another phone in the Cisco Unified
Communications Manager system.
Your system administrator sets up the parking number for the conference station.
Park call
Procedure
Step 1
During a call, press the Park.
The conference station screen displays the call park number where the system stored your call.
Step 2
Note the call park number displayed on the screen. This number is used to retrieve the call.
You have a limited time to retrieve a parked call before it reverts to ringing at the original number.
Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0
43
Calling features
Forward calls

Cisco 8831 Specifications

General

Brand	Cisco
Model	8831
Category	IP Phone
Language	English