Cisco 8831 User Manual

Cisco Extension Mobility
Cisco Extension Mobility allows you to temporarily configure a Cisco Unified IP Phone or Conference Station
to use as your own. After you log in to Extension Mobility, the new device adopts your user profile, features,
established services, and web-based settings. Your system administrator must configure Extension Mobility
for you.
The Cisco Extension Mobility ChangePIN feature allows you to change your PIN from your Cisco Unified
IP Phone.
Note
•
Extension Mobility automatically logs you out after a certain amount of time. Your system
administrator establishes this time limit.
•
Changes that you make to your Extension Mobility profile from your User Options web pages take
effect immediately if you are logged in to Extension Mobility on the physical device; otherwise,
changes take effect the next time you log in.
•
Changes that you make to a phone or conference station from your User Options web pages take
effect immediately if you are logged out of Extension Mobility; otherwise, changes take effect after
you log out.
•
Local settings controlled by the phone are not maintained in your Extension Mobility profile.
Enable Extension Mobility
Procedure
Step 1
Press Apps.
Step 2
Select EM Service.
Step 3
Enter your user ID and PIN.
The user ID and PIN are provided by your system administrator
Step 4
If prompted, select a device profile.
Step 5
To sign out, press Apps.
Step 6
Select Services.
Step 7
Select EM Service.
Step 8
At the prompt, press Yes.
Fast Dial
Fast Dial allows you dial a phone number from the Fast Dial service on your phone. Before you can use Fast
Dial on your phone, you must set up Fast Dial on your User Options web pages.
Cisco Unified IP Conference Phone 8831 User Guide for Cisco Unified Communications Manager 9.0
51
Calling features
Cisco Extension Mobility

Cisco 8831 Specifications

General

Brand	Cisco
Model	8831
Category	IP Phone
Language	English