Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Comprehensive Configuration Examples
The information in this chapter applies to the Cisco AS5350XM and Cisco AS5400XM universal
gateways.
This chapter includes sample outputs of the show config command after you have completed the
procedures in Chapter 2, “Verifying Basic Setup,” and have configured various advanced features.
The following examples are useful references for you only if you are experienced with the Cisco IOS
software:
• CT3 CAS/ISDN with RADIUS, page 1
• CT3 CAS/ISDN Without RADIUS, page 10
• CT3 Without Resource Pooling, page 19
• CT3 CAS with Resource Pooling, page 24
• Two 8 T1/PRI ISDN with Modems, page 30
• Two 8 E1/PRI ISDN with Modems, page 41
• Two 8 T1/PRI CAS with Modems, page 46
• Two 8 T1/PRI CAS with RADIUS (AAA) and Resource Pooling, page 50
• Two 8 T1/PRI ISDN with RADIUS (AAA) and Resource Pooling, page 55
• Two 8 E1/PRI ISDN with RADIUS (AAA) and Resource Pooling, page 67
• CT3 with Resource Pooling, AAA, and Modem, page 70
CT3 CAS/ISDN with RADIUS
AS5400# show config
Building configuration ...
Current configuration:
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
To Next Page
Loading...
Need help?
General