Cisco ASR 9000v User Manual

Procedure
Step 1 Push the door latch to the left to release the door.
Step 2 Pivot the door to the right to eject the power module from its bay.
Step 3 Slide the power module out of its bay while supporting it with your other hand.
Use two hands to remove the power module. The power supply weighs about 6.5 pounds (2.95 kg).
Caution
Figure 211: Removing or Installing a Version 1 AC or DC Power Module
Removing a Version 2 or Version 3 AC or DC Power Module
Follow these steps to remove a version 2 or version 3 AC or DC power module from the chassis (see figure
titled Removing or Installing a Version 2 or Version 3 AC or DC Power Module). The Cisco ASR 9904 Router
chassis only has one power tray as shown in the figure titled Removing or Installing a Version 2 AC or DC
Power Module from the Cisco ASR 9904 Router .
Procedure
Step 1 Pull the handle down.
Unscrew the screw that secures the power module using a 7/16 hex socket and torque wrench with
the torque set to 50 in-lb.
Note
Step 2 Slide the power module out of its bay while supporting it with your other hand.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
235
Replacing Cisco ASR 9000 Series Router Components
Removing a Version 2 or Version 3 AC or DC Power Module

Cisco ASR 9000v Specifications

General

Brand	Cisco
Model	ASR 9000v
Category	Network Router
Language	English