Cisco ASR 9000v User Manual

Fri Jul 12 20:51:19.365 UTC
Active Node Standby Node
----------- ------------
0/RP1/CPU0 0/RP0/CPU0(Node Ready, NSR:Ready)
Step 12 Remove standby RP2 (slot 0). Follow the procedure explained in the topic Removing and Replacing Cards
from the Chassis, on page 245.
Step 13 Insert and boot RP3 (slot 0). After booting, RP3 (slot 0) becomes standby RP. Verify using the show platform
command.
Example:
Router# show platform
Thu Jul 12 20:50:28.317 UTC
Node Type State Config state
---------------------------------------------------------------------------
0/RP0/CPU0 A99-RP3-SE(Standby) IOS XR RUN NSHUT
0/RP1/CPU0 A99-RP3-SE(Active) IOS XR RUN NSHUT
0/FT0 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/FT1 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/FT2 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/FT3 ASR-9922-FAN-V2 OPERATIONAL NSHUT
0/1/CPU0 A9K-8X100GE-TR IOS XR RUN NSHUT
0/FC0 A99-SFC2 OPERATIONAL NSHUT
0/FC1 A99-SFC2 OPERATIONAL NSHUT
0/FC2 A99-SFC2 OPERATIONAL NSHUT
0/FC3 A99-SFC2 OPERATIONAL NSHUT
0/FC4 A99-SFC2 OPERATIONAL NSHUT
0/FC5 A99-SFC2 OPERATIONAL NSHUT
0/FC6 A99-SFC2 OPERATIONAL NSHUT
0/PT1 A9K-AC-PEM-V2 OPERATIONAL NSHUT
0/PT2 A9K-AC-PEM-V2 OPERATIONAL NSHUT
0/PT3 A9K-AC-PEM-V2 OPERATIONAL NSHUT
Step 14 Repeat Step 6, Step 7 and Step 8.
Step 15 (Optional) Perform FPD upgrade on RP3. Use these commands:
An FPD upgrade can be performed after the FCs and LCs are added to the system.
Note
Example:
sysadmin-vm:0_RP1# upgrade hw-module location 0/RP0 fpd
sysadmin-vm:0_RP1# upgrade hw-module location 0/RP1 fpd
Step 16 Reload the system once FPDs are upgraded using the admin hw-module location all reload command.
Migrating from RSP440 to RSP880 or RSP880-LT Card
Before you begin:
• You must have console access to the router.
• The router must be running Cisco IOS XR software release 5.3.2 or later version to support RSP880.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
253
Replacing Cisco ASR 9000 Series Router Components
Migrating from RSP440 to RSP880 or RSP880-LT Card

Cisco ASR 9000v Specifications

General

Brand	Cisco
Model	ASR 9000v
Category	Network Router
Language	English