EasyManuals Logo
Home>Cisco>Network Router>ASR 9000v

Cisco ASR 9000v User Manual

Cisco ASR 9000v
284 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
The router normally operates within the ranges listed in the table; however, if a temperature measurement is
approaching a minimum or maximum parameter, it indicates a potential problem. Maintain normal operation
by anticipating and correcting environmental anomalies before they approach critical values by properly
planning and preparing your site before you install the router.
Power Connection Guidelines
You can configure the router with either an AC input or DC input power subsystem, so the site power source
requirements differ depending on the power subsystem in your router. Ensure all power connection wiring
conforms to the rules and regulations in the National Electrical Code (NEC) as well as local codes.
Each Cisco ASR 9000 Series Router is powered by only one type of input: AC or DC. A hybrid (AC+DC)
power configuration is not supported.
Caution
Table 2: Cisco ASR 9000 Series Routers Supported Power Systems
Supported Power SystemsRouter
Version 1: Supports up to three power modules in the power tray.
Version 2: Supports up to four power modules in the power tray Compatible only with
Cisco IOS XR Software Release 4 and later Cisco IOS XR software releases.
Version 3: Compatible only with Cisco IOS XR Software Release 6.5.3 and later Cisco
IOS XR software releases.
Cisco ASR 9006
Version 1: Supports up to three power modules in the power tray.
Version 2: Supports up to four power modules in the power tray Compatible only with
Cisco IOS XR Software Release 4 and later Cisco IOS XR software releases.
Version 3: Supports up to four DC power modules in the DC power tray and up to
three AC power modules in the AC power tray. Compatible only with Cisco IOS XR
Software Release 5.3.0 and later Cisco IOS XR software releases.
Cisco ASR 9010
Version 2: Supports up to four power modules in the power tray. Compatible only with
Cisco IOS XR Software Release 4 and later Cisco IOS XR software releases.
Version 3: Compatible only with Cisco IOS XR Software Release 6.5.3 and later Cisco
IOS XR software releases.
Cisco ASR 9904
Version 3: Supports up to three AC power modules in the AC power tray and up to
four DC power modules in the DC power tray.
Cisco ASR 9906
Version 3: Supports up to three AC power modules in the AC power tray and up to
four DC power modules in the DC power tray.
Cisco ASR 9910
Version 2: Supports up to four power modules in the power tray.
Version 3: Supports up to four DC power modules in the DC power tray and up to
three AC power modules in the AC power tray. Compatible only with Cisco IOS XR
Software Release 5.3.0 and later Cisco IOS XR software releases.
Cisco ASR 9912
Cisco ASR 9922
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
27
Preparing for Installation
Power Connection Guidelines

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9000v and is the answer not in the manual?

Cisco ASR 9000v Specifications

General IconGeneral
BrandCisco
ModelASR 9000v
CategoryNetwork Router
LanguageEnglish

Related product manuals