Cisco ASR 9000v User Manual

In the front-mounted position, you secure the chassis rack-mounting brackets directly to the rack posts (see
below figures). Two rear mounting brackets are provided for mounting the Cisco ASR 9010 Router in a 2-post
rack.
Use 2 post rack-mounting brackets and associated hardware to secure rear mounting bracket to sides of chassis
and back of 2 post rack.
The mounting brackets on the Cisco ASR 9006 Router chassis have a pair of holes at the top and bottom of
each bracket; the remaining openings in the brackets are slots. When mounting the router in a 2-post rack,
you must first use the holes to locate and position the brackets on the rack. Insert the screws through the
bracket holes into the rack before inserting screws through the bracket slots.
Note
Figure 11: Cisco ASR 9010 Router Mounted in a 2-Post Rack
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
11
Preparing for Installation
Telco 2-Post Rack

Cisco ASR 9000v Specifications

General

Brand	Cisco
Model	ASR 9000v
Category	Network Router
Language	English