Cisco ASR 9001 Installation Guide

• Ensure that you have the following clearances around the chassis:
• Rear and front: Minimum of 6.00 inches (15.24 cm) of clearance.
• Sides: Minimum of 2.95 inches (7.49 cm) of clearance on each side of the chassis.
This figure shows the side, front, and rear chassis air-flow clearance requirements for mounting the Cisco
ASR 9906 Router in a 4-post enclosed rack.
Figure 23: Cisco ASR 9906 Router Clearance Requirements in a 4-Post Rack Installation
Cisco ASR 9910 Router Clearance Requirements
To install the Cisco ASR 9910 in a 4-post enclosed cabinet:
• The front and rear doors of the cabinet must be removed or be perforated with a minimum open area of
70 percent open area (80 percent for 800-mm racks).
• Ensure that you have the following clearances around the chassis:
• Rear: Minimum of 6 inches (15.24 cm) of clearance.
• Sides: Minimum of 2.87 inches (7.28 cm) of clearance on each side of the chassis.
This figure shows the side and rear chassis air-flow clearance requirements for mounting the router in a 4-post
enclosed rack.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
23
Preparing for Installation
Cisco ASR 9910 Router Clearance Requirements

Cisco ASR 9001 Specifications

General

Brand	Cisco
Model	ASR 9001
Category	Network Router
Language	English